Start the party early. Discover our bestselling products. SHOP.
Stores

Bose noise-masking sleepbuds™

Sold from 2018 – 2019

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Product will not turn on

If your product appears to be receiving power but won't power on as expected:

Put your Sleepbuds in the charging case for a few seconds, then remove them.

During an update, the Sleepbuds power off. Once updated, they just need to be reactivated by briefly putting them in the charging case, then removing them.

Put your Sleepbuds in the charging case, then connect the case to a power outlet.

When your Sleepbuds are in the charging case, the case makes sure they stay charged, which uses uses the battery in the case. If the battery level of the case fully drains, your Sleepbuds won't charge and might not wake when you remove them from the case. Connect the case to a charger, then remove your Sleepbuds from the case to wake them.

Tip: If your case doesn't need to be unplugged from power (i.e. if you keep the case in the same spot), keep it connected to power. This way, when you need to bring your Sleepbuds somewhere, the case is charged.

Check the power connections at your product and at the power source.

Be sure the power connections to your product are secure both to the AC (mains) outlet and to your product. For more info, see Connecting to power.

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.

Try a different USB cable.

Try connecting your product with a different USB cable to determine if there is an issue with the first cable.

Try a different charger.

Charge times can vary based on the charger. Chargers with a higher current rating generally charge products faster than those with a lower rating. Chargers typically list a current rating on the label in amps (A) or milliamps (mA). A current rating of 1 A / 1000 mA or higher is recommended.

Try connecting a wall outlet.

Some USB chargers, like USB ports on computers or others devices, might not output adequate power to charge your product. Instead, try connecting your product to a wall outlet using a USB charger.

Leave the charging case connected to a wall outlet for at least 15 minutes.

If the charging case battery has fully discharged, it might need to be plugged in to a charger for about 15 minutes before it lights up. Once it does light up, let it fully charge.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Was this article helpful?
Submit
Thank you for your feedback!