Back to article
3344
Product will not turn on
If your product appears to be receiving power but won't power on as expected:
Try charging your product for a few minutes.
If the battery level is very low, your product might go into a battery protection state. If this happens, voice prompts might not sound and alert you of the low battery status. Try charging your product for a few minutes, then try again.
If your product has been in extreme hot or cold temperature, wait until it reaches room temperature.
If the battery temperature is beyond the operating temperature range, wait until the product reaches room temperature, then try again.
Your Frames ship with a partial charge and may need to wake up before first use
To wake up your Frames, connect the Frames to power for 2 seconds and then disconnect. Try powering on again.
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Was this article helpful?
Thank you for your feedback!