Proper fit on your head is important both for comfort and optimal noise-reduction performance. Here are a few guidelines:
Wearing and adjusting the headset
Applies to:
/set_up/a20_headset_right_left.psd/jcr:content/renditions/cq5dam.web.320.320.jpeg)
As you put the headset on, lightly grasp each earcup and adjust it so its cushion is completely over your ear. You should feel an even, gentle pressure all around each ear
Adjust the headband so it rests gently on top of your head
Make your final adjustments with the headset powered on in a noisy environment. In very loud conditions, such as during takeoff, you may experience a brief reduction in noise cancellation as the headset compensates for a momentary pressure change.
A low, rumbling sound or frequent, brief losses of noise reduction may indicate an improper fit or blocked earcup ports. During a long flight, you may feel a slight pressure point, which can be relieved by adjusting the headband position. Your experience with using the headset will help establish a sense of how it should sound and feel.
Microphone placement is important for clear communications. With the headset on your head, make these adjustments:
Grasp the boom with your fingers and move the microphone up or down so it is level with your mouth
/set_up/a20_mic_position.psd/jcr:content/renditions/cq5dam.web.320.320.jpeg)
Make sure the talk side of the microphone is facing your lips. Do not purse your lips
The control module cable is fitted with two clothing clips. Use the clips to attach the headset cable to your clothing, a safety harness or an aircraft door pocket