press power to turn on the headset
Pairing a Bluetooth®-enabled device (Bluetooth® models only)
Applies to:
/connecting_other_products/a20v2_bt_module_power_button.psd/jcr:content/renditions/cq5dam.web.320.320.jpeg)
Make sure the Secondary Audio Mode selector is in the MUTE or MIX position (not OFF)
/connecting_other_products/a20v2_sams_switches.psd/jcr:content/renditions/cq5dam.web.320.320.jpeg)
The power indicator glows green or yellow, depending on the charge level of the battery. If the light is red, the battery is low and needs replacing.
the bluetooth® indicator flashes purple to indicate the headset is in pairing mode.
note: the first time you turn on the headset, it will automatically go into pairing mode and the bluetooth® indicator will flash purple. this will only happen the first time you turn on the headset.
locate the bluetooth® menu on your device and make sure the bluetooth® feature is on
select bose® a20® from the bluetooth® device list
the bluetooth® indicator flashes blue while the devices are pairing and a tone indicates successful connection.
note: after five minutes of inactivity, the headset will automatically exit pairing mode and the bluetooth® indicator will turn off. to turn the bluetooth® feature back on, press the bluetooth® function button.
/connecting_other_products/a20v2_bt_module_bt_button.psd/jcr:content/renditions/cq5dam.web.320.320.jpeg)
The headset can pair with up to eight devices. To pair another device, follow these steps:
press and hold the bluetooth® function button for one second to put the headset into pairing mode. the bluetooth® indicator flashes purple
locate the bluetooth® menu on your device and make sure the bluetooth® feature is on
select bose® a20® from the bluetooth® device list. the bluetooth® indicator flashes blue while the devices are pairing
Note: The headset will automatically exit pairing mode after five minutes of inactivity.
the headset can connect to two bluetooth® devices at a time. only one connected device can be heard at a time
to switch between two connected bluetooth® devices, pause audio on the first device and start audio on the other
to confirm connection, check the bluetooth® device list on your device
note: incoming and outgoing phone calls automatically mute all other secondary audio sources (when the secondary audio mode selector is in the mute or mix position). during a bluetooth® phone call, the intercom and the phone call will be heard as mixed.